What the russian 3d scanner mean about the test reports?

What the russian 3d scanner mean about the test reports?

The russian 3d scanner comes with a software package called Diacom. Diacom stands for Digital Imaging and Communications in Medicine (russian 3d scanner).
Diacom is the software standard that drives the russian 3d scanner. It performs a sweep of all internal bodily organs, outputting a test signature for each bodily organ using the transmitter in the sonic headphones and recording measurements using the receiver in the headphone unit.

Measurements are sent to the computer via USB port, and it is the Diacom software that compares measurements made by the NLS analyzer with the developed database, and reports just how far measurements deviate from those in a healthy person. The beauty of this system is that each major organ is presented as a 3D picture, and a coding system is used to pinpoint irregularities in the organ. The following example is of an individual with a diseased Aorta. The patient in this case was advised to see a doctor, and subsequently a cardiologist.
1 – Normal State;
2 – Standard Condition;
3 – Restricted State;
4 – Weak State;
5 – Abnormal Condition;
6 – Serious Disorders State
Minimum Computer System Requirements
CD Rom Drive
Minimum Windows 98 (any version of windows from windows 98 to the current version). Will NOT operate on Mac computers.
Minimum 1Gb Hard Drive Space
USB Port
250Mb RAM Memory
Minimum Screen Resolution: 1024 x 768. Any resolution higher than this is ok, although it is recommended that the resolution is set to a 5:4 ratio.

What russian 3d scanner advantage?

What russian 3d scanner advantage?

· It allows the visualization of the corporal functioning according to the own chronobiology of each individual.
· Identify structural disease.
· Dynamic and precise analysis
· Non-invasive technological procedure, which allows an exhaustive diagnosis of the functioning of each organ and its internal functions; evaluating through the scanning system and in 3D, the bioelectrical level of the main structures of the human body.
· Determines the potential risk of suffering from certain pathologies.
· General condition of organs. In addition to detect the organ and diseased systems.

russian 3d scanner health analyzer through light waves, sonar, through the eardrum in the human brain, using quantum resonance applied to probe techniques of specific organs of the body tissues of the hydrogen energy Atomic, the resonance of electromagnetic waves and then feedback to the computer, compared to a huge database, which allows detection of the pathologies of organs currently, past, and in an upcoming period of 3 ~ 5 years.

1) The technology of the russian 3d scanner is not invasive, the patient will not feel any discomfort before or after the test. The voltage of the electrical stimulation does not cause any damage to the skin, it is not reactive, therefore there is no possibility of radiation, it does not produce side effects.
2) It only takes 30 minutes to quickly analyze and detect the state of the body and the assessment of the patient’s health status by exploring 3D body organs.
3) 12 systems of the human body and its tissues can be detected, changes, comparison of the scan range up to 300 exams.
4) It allows a clear evaluation of the risk of suffering certain pathologies, giving the patient the possibility of reducing an attack and giving him the opportunity to achieve the effect of prevention. The bio-scan allows us to obtain a clear analysis about the behavior of the organism and health in a period of 3 ~ 5 years.
5) russian 3d scanner technology fuses spectral resonance, quantum resonance analysis and acoustic resonance analysis.
6) Test different foods / products for health care affect the circumstances of the body.
7) Detection function and automatic check of 12 systems (heart, lung, brain, liver, etc …) 256 reports of glands, cells etc, accurate prediction of 4,352 types of diseases based on the check of 120,000 body points users can see their organs now, in the past and the tendency to their health and the organization of future cellular vitality in a period 3 to 5 years.
8) Function of analysis: You can analyze foods and health products by verifying if they can have a beneficial or harmful effect by establishing a balance for the organism.
9) Treatment and repair function: With the restoration by means of energy of the spectrum and the function of repair, it attacks in an early stage the disease even preventively. This effect is especially applicable for the repair of pain points with auxiliary healing effect.

What Principle oF russian 3d scanner?

What Principle oF russian 3d scanner?

Physics subject :

Sonar technology

Resonance theory

Light-wave scanning

Statistics subject:The database for the human is very enormous,The database is based on the standard

of the same testing including different age,race,gender and disease. The medical information for Diagnostic

is reach 863 items .

How to Energy and Frequency Repair for Bodily Organ Recovery?

How to Energy and Frequency Repair for Bodily Organ Recovery?

Using the assessment data, the russian 3d scanner is able to create vibrational medicine remedies using water as a basis to counter imbalanced frequencies representing stress and dis-ease.

Procedure

Prepare a glass cup (flat thin bottom).
Add 100-200mL of pure water into the glass cup.
Confirm that the items cup is linked to the host.
Place the headset onto the client.
Click on the energy copy button and select water as the medium.
Click the turn over key, copy the wave oscillation spectrum to reverse the dis-ease.
Click the START button, and begin to copy.
The program will copy the reverse frequencies into water. It is recommended that the water is consumed over 30 min. It is suggested that no more than 5 cups are consumed in one day.
Consume the water oince daily for best results.

WHAT 3 MAIN FUNCTIONS OF russian 3d scanner?

WHAT 3 MAIN FUNCTIONS OF russian 3d scanner?

1. Detection and Assessment of The Human Body

The system can easily assess a patient’s physical conditions, disease trends, as well as forecast health direction over the next 3-5 years. Through a patient therapist relationship, the therapist is able to advise life style changes to give the notion of prevention is better than cure. A 3D presentation allows the client to visually see their bodily organs in their current state.

2. Confirms whether Food and Healthcare Products are Helpful Or Harmful to the Body

The 3D NLS analyzer can analyze food and healthcare products and determine whether they are going to be good or harmful to the client’s body. This is useful in determining substances that could be causing allergic symptom in the patient.

Procedure

Connect the items cup link to the russian 3d scanner.
Place drugs or health food into item cup (Note: unless you are a medical doctor, you are not allowed to recommend taking a patient off their medication without the consent of their doctor).
Click the organs that you wish to assess
Place the headset onto the patient
Click vegetotest in the Diacom software, enter the name of the drug or health food, and then start the test to assess out the drug or health food impact testing.
After completing the test, the results will show in the in organ diagnosis list.
Press analysis key to carry out the drug or health food analysis comparison.
On the analysis of the comparison window, select the organs that have been detected and click auto search.
The comparison window will search the organs to compare and analyze automatically.

3. Energy and Frequency Repair for Bodily Organ Recovery

Using the assessment data, the russian 3d scanner is able to create vibrational medicine remedies using water as a basis to counter imbalanced frequencies representing stress and dis-ease.

Procedure

Prepare a glass cup (flat thin bottom).
Add 100-200mL of pure water into the glass cup.
Confirm that the items cup is linked to the host.
Place the headset onto the client.
Click on the energy copy button and select water as the medium.
Click the turn over key, copy the wave oscillation spectrum to reverse the dis-ease.
Click the START button, and begin to copy.
The program will copy the reverse frequencies into water. It is recommended that the water is consumed over 30 min. It is suggested that no more than 5 cups are consumed in one day.
Consume the water oince daily for best results.